Scaffolding- an skilful art of working

Erecting a platform is done in two phases the first one is setting up the base frames and the next one is installing the upper levels.

Base frames are foundation upon which the whole system is to be set up. The AS1163/EN39 standard is for Tubes and Fittings, Perth adheres to AS1576.2/EN74. The base frames should be made secure with Screw jacks or base plates. In case some components need to be moved, then castor wheels can be added into the system for greater leverage.

After the base plate is set up efficiently, the upper levels need to be constructed. The height in the level can be achieved by using aluminium ladders. The different sections of the first level are set with the help of string lines, after which the steel base plates are nailed to the base blocks. The base plates of best quality should be used on wooden decks, concrete and asphalt to ensure safety.

Couplers are important one of the most essential components of any full fledged scaffolding system that is to be used in the construction industry to provide strength to the constructed structure. Australian market uses hot-dipped deep galvanized steel couplers for fitting purposes. Hot dipping process makes the steel coupler more corrosion resistant and also the age of the fitting increases considerably Increases . These couplers are subjected to a series of stress tests so as to ensure their durability along with their compliance with the AS1576.2 quality standards laid down for fittings in Australia. There is a huge range of couplers that comprise scaffolding sales in the country; the choices of this product widely known in the country are listed below:

Pressed Double Coupler are used to join two tubes at an angle of 90 degree to each other. They possesses a single-piece body with T-bolts and flaps, which can be removed at the time of replacement as well as maintenance. The product has superb load bearing capacity, and is able to resist slipping and corrosion, it is one of the most useful part of a staging system. A Pressed Swivel Coupler on the other hand can connect two tubes at any angle so as to create a ledger brace, façade or any bracing of the similar kind.

A double coupler is used for fastening of levels. Bracing the staging structure is also important, as it ensures that the whole setup will not sway in case of adverse working conditions.



Author:
Aaishah Jane has 5 long years of experience in Building construction and Scaffolding WA.Currently she is working with leading Scaffolding organization as Architect engineer and writing on scaffolding Australia as well as Spanners. She has written some outstanding content for the readers.